Allen dual head, No. 2 morse taper on spindles, 6" riser blocks on heads, with motor controls, step pulley 5 speed, sliding heads on spindles, 14" x 26" table inside coolant trough, 1hp 220/440/3ph (PHOTO1) (PHOTO2)........$1,200

 Allen 19" dual head, High speed Head on one head 9 speeds from 500 to 4,580rpm, 1/32" to 1/2" Albright keyless chuck, powered down feed, max daylight under spindle is 11"/could be raised if you add spacer under head, 5" spindle travel, sliding heads adjust 6", 1/2hp 3ph motor, other head is 4 speed from 900 to 2,070rpm, with Jacobs 1/2" chuck, 1hp 208-220/440/3ph, both heads mounted on a steel table that measures 32"W x 74"L x 31"H with 3/4" steel plate on top, over all height is 70"H (PHOTO1) (PHOTO2) (PHOTO3)....$1,750

Allen 16" Floor Drill, 3/8" drill Jacobs chuck, 4 speed 990/1,565/2,640/4,180 rpm, S# 20537, 20" x 14"  T slotted table, 4" spindle travel with power down feed (PHOTO1) (PHOTO2).....................................................$1,100

Allen 30" die drill, S# 26632, 5" spindle travel, 34" x 25" heavy table, 3 power down feeds .003/.006/.010, Spindle speeds are 1/4 of normal with gear motor on it, 4 speeds from 85 to 500rpm would be 340 to 2,000rpm with 1,200rpm motor, coolant, 1hp 340rpm 220/440/3ph (PHOTO1) (PHOTO2)....................................................................................$1,500

Avey 16" High Speed Gang drill, 4 spindle only 3 working, 39" x 12" table, 3 drill chucks Jacobs 1/2"-3/8"-1/4", 8 speeds 800/1,050/1,600/2,100/3,000/4,000/6,000/8,000rpm, 1/4hp coolant, S# 31394-3 (PHOTO1) (PHOTO2)..............$1,200

Avey 18" Number 2 Drill, S# MA1260, 5" spindle travel, No. 2 morse taper, 1 speed 715rpm, 16" x 14" table, 1.5hp 3,450rpm 220/440/3ph (PHOTO)............................................................................$800

Avey 2 Spindle 20" No. 2, S# 22339, No. 3 morse taper, power down feed, 32" x 21" table, 6 speeds from 225 to 1,800rpm, 1.75/.875hp 220v 3ph, 2 speed motor (PHOTO)..............................................$1,500

Avey 4 Spindle 28" swing, size 2, geared head, 59" x 22" table, gang drill, adjustable table, No. 2 morse, 6 spindle speeds from 150 to 1,800rpm, S# MA15600, 1hp 220/440/3ph (PHOTO)...............................$3,000

Avey 4 spindle gang Drill, size 2, style MA6, S# MA7770 & S# MA8480, 4 power down feeds .003/.006/.009/.012, 6 speeds 225/450/675/900/1,350/1,800, 1.75hp/.875hp 2 speed 220v 3ph (PHOTO1) (PHOTO2) .......................(2 in stock)$2,000 each

Boice Crane Gear Head Drill 23" Swing, powered down feed/3 rates, No. 3 morse taper, 8 speed 82 to 1,460rpm, 5" spindle travel, 20" x 25" table, 1/2" Jacobs ball chuck 220v 3ph 2 speed motor 1.1/1.6hp (PHOTO1) (PHOTO2)............$1,750

Boston Table with Nasco Tapping Arm, model VTSK-36FL, 24" x 56" table size, motorized adjustable height on table, on wheels, 30" reach on tapping arm (PHOTO1) (PHOTO2)....................................$1,250

Buffalo 2 spindle 16" drill, Model No. 16, 28" swing in gap, No. 2 morse spindles, 11.5" x 56" table adjust up/down 12" with coolant trough, 6" spindle travel, 5 speeds - 400/660/100/1,800/3,000rpm (PHOTO)...................$1,100

Buffalo 26" swing, variable speed, high speed drill, S# 59-7869, power down feed, 19" x 22" T slotted box table, sliding head, 3hp 440v 3ph, No. 4 Morris taper (PHOTO)......................................................$2,900

Burgmaster B-921291, auto turret, coolant, on stand with chucks, 115v 1ph (PHOTO)...................$1,600

Burgmaster 1D-2462, 1-1/2hp, 2 speed 208/220/440/3ph, 12 speeds from 215 to 4,010rpm on spindles, auto turret, coolant (PHOTO)..........................$3,500

Burgmaster 2A-2297 2hp, auto turret, coolant (PHOTO)......$3,950

Cemco Gang Drill, 10' x 16" table, 12 spindles, hydraulic rise fall on head, spindles are adjustable in/out 16" and full length of table, all spindles are 1hp each and 1,700rpm, Drill heads have 1/2" drill chucks, S# SVB589 over all size is 11'L x 88"H x 40"W (PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4)........P.O.R.

Cincinnati 24", Geared head, 20" x 20" T slotted table, 10" spindle travel, No. 4 morse taper spindle, 3hp 1,150rpm 440v (PHOTO)................$900

Cincinnati Bickford, 28", "Super Service", 22" x 13.5" table with X and Y Movement & Dials so you line up hole, 11" spindle travel, 12 speeds from 60 to 1,000rpm, 9 down feed rates from .005 to .043 per rev, 7.5hp 220/440/3ph (PHOTO1) (PHOTO2)..............$6,750

Cincinnati Bickford, 28" swing, "Super Service", No. 5 MT Production 10hp (PHOTO1) (PHOTO2)..................$7,500

Cincinnati Bickford, 28" swing, "Super Service", 7.5hp, 24" square, No. 5 MT (PHOTO).................................$7,500

Clausing Drill Press' on Table, 2 on 60"W x 20"D Clausing table, (#1) Model 1668, S# 514437, (#2) Model 1668, S# 514435, Both are 3/4hp 208 - 220/440v, Spindle speeds 330 - 4,000rpm, Motors 1,200 - 1,800rpm (PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4) (PHOTO5) (PHOTO6) (PHOTO7) (PHOTO8) (PHOTO9) (PHOTO10)...................................$1,950

Clausing 20" Variable Speed, model 2287, S# 506325, 2 speed motor/speed range low from 150 to 1,000rpm/high from 300 to 2,000rpm, 6.5" spindle travel, mounted on 24" x 40" steel table with coolant trough, No. 3 morse, 1.5hp. 440v 3ph (PHOTO)....$2,100

Cleereman 30" swing, sliding head drill, geared head, round column, 12" spindle travel, 27" round table T slotted, No. 4 morse taper, 16" travel up/down on table, 1/4hp coolant pump, 12 speeds from 75 to 1,500rpm, power down feed, 7.5hp 220v 3ph, cleaned and painted (PHOTO).........................$6,500

Cleereman 30" swing, sliding head drill, geared head, round column, S# 30C-241, 12" spindle travel, 27" round table T slotted, No. 4 morse taper, 16" travel up/down on table, 1/4hp coolant pump, 12 speeds from 75 to 1,500rpm, power down feed, 7.5hp 220/440/3ph (PHOTO1) (PHOTO2)......................$6,500

Cleereman 28" swing, geared head, 12 speeds from 75 to 1,500rpm, 7.5hp, round table, power down feed (PHOTO).....$6,500

Cleveland Tapper 8" throat, 6 thread chasers, model E00, S# 527, 1/2" cap, No. 2 morse taper spindle, coolant, variable stroke, auto/manual w/electric foot trip (PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4)...........................$2,500

DoAll geared Head drill 20" swing, No. 3MT, 1.0/1.2hp 2 speed 208v 3ph, 18" x 24" T slotted table, 120 to 1,640rpm (PHOTO)......$1,950

DoAll geared Head Drill 20" swing, No. 3MT, 5" spindle travel, powered down feed, 8 speeds from 80 to 2,300rpm, model DGP-2, S# 5-8907, 5/8" drill chuck 13" x 16" T slotted table, 1.9 hp 460v 3ph (PHOTO)..............$2,500

DoAll geared Head Drill 24" swing, No. 3MT, type 24200, S# 34051, 8 speeds from 82 to 1,460rpm, 17" x 21" T slotted table, 5/8" drill chuck, 1.8 hp 460v 3ph (PHOTO)................$2,500

Delta 17", 1 head mounted on heavy cast iron table with coolant trough 36" x 24", step pulley, 5 speed, No. 2 morse taper, 1hp 220/440/3ph ......$950

Delta Radial Drill 60" max swing, 1/2" drill cap, No. 2 morse, 18" x 26" T slotted table, 16 speeds 175 to 8,200rpm, 6" spindle travel, 3/4hp 110v 1ph, cleaned and painted (PHOTO)..............................................$2,500

Delta Radial Drill 60" max swing, 1/2" drill cap, No. 2 morse, 18" x 26" T slotted table, 16 speeds 175 to 8,200rpm, 6" spindle travel, 3/4hp 110v 1ph, cleaned and painted (PHOTO)..............................................$2,950

Delta Rockwell Radial Drill, High Speed, 30" throat / 60" swing max, model 15-120, S# 1798488, 1/2" drill chuck, 42" max column height, 16 speeds from 175 to 8,200rpm, 28" x 18" heavy T slotted table, 6" spindle travel 1/2hp 115/230/1ph (PHOTO1) (PHOTO2)...........$3,500

Delta 17" 3/4hp 220/440/3ph, floor type, 1/2" Jacobs chuck, 12" x 11" universal table (PHOTO).............. $700

Desoutter Drill heads 3,000 rpm, air powered feed up to 4", model AFDKE, 2 available, set up for drill chucks one has a 5/16 Jacobs on it, 1/3hp 3,000rpm 220/420/3ph (PHOTO1) (PHOTO2).................($400 each SOLD)/ Still have stands $150 each

Edlund 18" drill, model model 2B-8, S# 5640-B, 8 speeds from 176rpm to 2,880rpm, sliding head moves 8", motor controls, spindle travel 6", No. 2 morse taper, 18" round slotted table, 1 hp 220/440/3ph 1,140rpm (PHOTO).....................................$1,100

Edlund 22", model 2F12, ser 66336, 7 " spindle travel, 7" travel on sliding head,  20" x 24" T slotted  table, 26" swing in gap, no 2 morse taper, Power down feeds 8 from .0015 to .030, Coolant, Variable speed, 3 hp 208/220/440 (PHOTO)................$2,250

Edlund 16" High speed 4 head gang drill, variable speed drill, 2 spindles speed is from 600 to 5,000rpm other 2 have 900 to 7,200rpm spindles, model 1F7, S# 5915 (PHOTO1) (PHOTO2)...................(Like New) $2,400

Enco 20" Variable Speed  Floor Drill Press, Model 126-2650, S# 501087, #3 Morse taper, Drill dia. 3/16" to 1.5" (5 to 38mm), Copper & Alum. 750 to 3,750rpm, Steel 300 to 1,500rpm, Cast Iron 350 to 1,600rpm, 110/220v Wired 110v 1ph 1.5hp (PHOTO1) (PHOTO2)......................................$1,200

New Enco 22" Swing, Model 793.128889307, S# 388669, Mfg. Date 2006, Drilling Capacity 1", Chuck size 5/8", Spindle travel 4-13/16", Spindle distance to table 26-3/4",  Spindle distance to base 48", Table size 18-5/8" x 16-1/8", Column diameter 3-5/8", Spindle speeds 12, Spindle RPM 180-4,200, Spindle taper MT3, Overall height 69-1/4", Base size 22-1/2" x 19-1/2", 1hp/1ph, Est. Wt. 348lbs  , 2 in stock one still boxed  , (PHOTO1) (PHOTO2) (PHOTO3).............................................................$650

Fosdick 24" 2 spindle geared head, S# 11894, power down feeds 4 .0015/.003/.006/.012 per rev, Speeds 6 225/370/480/800/1,085/1,800, No. 3 morse, 6" spindle travel, 38" x 24" table, 2hp 220/440/3ph (PHOTO)..............$1,500

Hammer 6" High Speed Drill, 1/4" Jacobs chuck, model R53, S# A-85653, 1/4Hp 220v 3ph, 2.5" spindle travel (PHOTO).....$500

Hamilton Bench top high speed drill press, 2 speed, 10" swing, 1/4" drill chuck, 4" spindle travel, 6" x 10" knee table, S# 223653, 1/2hp 3,450rpm 115v 1ph motor (PHOTO).........................$500

Keller Air Feed Drill, Size 9210P86, S# K-167462, No. 4 morse taper, 6" stroke, aprox 200rpm/variable, air powered, main body 4" round, overall length 54.5" (PHOTO)...........................$500

Leland Gifford 24" 4 spindle, No. 2 morse spindles, 4 speed 540/825/1100/1695, 2/1.33/1/.67 Hp 440v motors with a 220 to 440v transformer on machine to run it on 220v 3ph,  S# 2MS1113,  56" x 20" T slotted table, coolant (PHOTO1) (PHOTO2)...............$1,600

New Enco 22" Drill Press, No. 3 morse, 1hp 115v 1ph, T slotted heavy duty table, (PHOTO).......................................$600

Natco Center Drilling Machine, model carvin 1-SS, S# 223, 52" aprox centers with max swing of 14", 2- 1/8"- 5/8" Jacobs drill chucks, has pair v block holders with adjustable center height, 2 - 1.5Hp 220/440/3ph drill head motors, aprox 5" spindle stroke, coolant with electrics, over all size is 93"L x 64"H x 44"W (PHOTO1) (PHOTO2) (PHOTO3).....................$3,500

Natco multi spindle Drill, 50 spindles, Model C4B, S# 11137, 40" round area, 1.5" uppers, 26 spindles with machine No. 2 & 3 mores, 42" x 30" T slotted table, has tapping capacity, 25 hp 220/440/3ph (PHOTO)............................................................$8,000

Natco Multi Spindle Drill model D-8, S# 133, 24 spindle, 25" x 36" table, power rise and fall on table, 3hp 220/440/3ph (PHOTO).....................$3,500

Powermatic Model 1150A, S# 9115V283, 450-4,800rpm, vari speed, universal table, chuck & key, 5" spindle travel, work light, 1ph 110v 3/4hp (PHOTO1) (PHOTO2)............................$1,000

Procunier No. 1 Lead Screw cap 3/16" steel with 2 spindle procunier head to tap two holes at same time, adjustable spindles from 1" apart to 4.5" aprox, collet type spindles, 1/2hp 115/208-230 (2 in stock) mounted opposing each other right now to tap holes in both sides of a part at same time (PHOTO1) (PHOTO2) (PHOTO3)...........$500 Each or $800 for whole thing

Rockford Articulating Arm Drill 48" swing, model EFI-3T, S# 29236-45, series 70-150, 12 speeds from 90 to 3,360 rpm, 6" column, 18" x 30" T slotted table, Powered up/down on arm, 1.9hp 460v 3ph (PHOTO1) (PHOTO2).............$4,500

Sterling 2.5" Drill Grinder/Sharpener, S# DG82-17, diamond wheel sharpener, coolant mister, micro gauge adj. for grinding, 1/2hp 115v 1ph Baldor motor 3,450rpm (PHOTO1) (PHOTO2)...............................$1,600

Sterling 2.5" Drill Grinder/Sharpener, model EN 56C34F205A, S# DG6310, 0-2.5" drill meter gage, 8-10-12 deg drill clearance, 0-2.5" drill diameter, 3/4hp 115/230/1ph 60hz 3,450rpm (PHOTO1) (PHOTO2) (PHOTO3)..................................$2,200

Sterling 2.5" Drill Grinder/Sharpener, S#DG8676, 8-10-12 deg drill clearance, 0-2.5" drill meter gage, diamond sharpener, 110v ph1 60hz (PHOTO1) (PHOTO2) (PHOTO3)...............$1,950

Walker 15", 1/2", S# 52DE4A, 1/2hp 208/220/440/3ph (PHOTO).....................$450

 Walker Turner 15" 6 head, model 1300, S# 13-0816, with 6.5" Cap drill chucks 2 Jacobs and 4 Albright, 1/2hp 220/440/3ph pulley has 5 speed ranges (PHOTO)......................................................$2,800

Walker Turner Gang Drill, with 20" drill heads mounted on rail to give Large Swing up to 134" swing, 3 heads, No. 2 morse taper, S# 53E2P1B, 10'5" table with coolant trough, 1hp 220/440/3ph motors on each head, step pulley 5 speeds (PHOTO)....$1,400

Walker Turner 20" Stand Drill, S# 52E3A3, 5 speed step pulley head, head has back shaft installed for slower speeds for tapping, comes with No. 2 procunier tapping head good for 1/2" in brass or 3/8" in cast iron or 5/16" in steel, No. 3 morse taper spindle, 7" spindle travel, 18" x 15" T slotted table, forward reverse control, 1hp 208 220/440/3ph (PHOTO)...............$1,350

Walker Turner 20" Stand Drill, S# 11-0473, 5 speed step pulley head, No. 3 morse taper spindle, 7" spindle travel, 18" x 15" T slotted table, forward reverse control, 1hp 208 220/440/3ph ................$1,000

Walker Turner 20" Stand Drill, S# 2-1143, 5 speed step pulley head from 260rpm to 1,700rpm, No. 3 morse taper spindle, power down feed, 7" spindle travel, 18" x 14" T slotted table, forward reverse control, 1hp 208 220/440/3ph ................$1,200

WestHoff Ultra Sensitive Drilling machine, Model 100-1, S# 84-358, 1/10hp 115v variable speed from 0 to 15,000rpm, 0 to 1/8" Albright keyless chuck, 12" horiz travel, 4.5" vert travel, 8.5" x 8.5" table that slides on ball ways, over all size 32"L x 22"W x 18"H, aprox 45lbs, (PHOTO1) (PHOTO2)...............$1,000 new cost is $2,450

Wilton Strand 20" Throat Gear Head Floor Drill Press, Model 20606, S# 89970, Motor RPM 1,700/3,400, Spindle RPM 120 to 3,480, #3 Morse taper, Built in light, 230v 0,9/1,1kw 3.6/4.4amp ~60 (PHOTO1) (PHOTO2) (PHOTO3).......................................$1,750

York 23" Gear Head Drill, model No. 10, type FB4, S# 6264, speeds 12 from 115 to 3,240rpm, 4" spindle travel, No. 3 morse taper, .95/.55kw 220v 3ph 2 speed motor, comes with 3/4" Jacobs ball chuck (PHOTO1) (PHOTO2)....................$2,400