|
Mills Horizontal |
 Adock Shipley Production Mill
7" x 26"
Table,
S# 1EAC308006677, 12 Spindle speeds from 200 to 1,960 rpm,
2hp 220/440/3ph
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
$2,000 |
 Cincinnati Horiz. Mill
Model 2LR, S# 5J2U1W-56, Table
Size 9.5" x 52" Swivel Adj., Work area 6.5" x 44", Spindle speeds 16 ranges from
25 to 1,500 rpm, Spindle to center of arbor 6", 16 Feed ranges from 1/4" to 30",
Powered X-Y on knee, Acu-Rite DRO, One shot lube on table, Work light, Est. Wt. 3,500 lbs., Overall dim. 5' 11"W x 6'FB x 5'H
(PHOTO1) (PHOTO2) (PHOTO3)
$4,000 SOLD |
 Cincinnati 2MH universal
10.5" x 52.5" Table, w/Universal vert head, 2
Arbor supports, 23 to 1,200 rpm,
Fully powered knee, Cleaned and painted
(PHOTO)
$3,900 |
 Cincinnati No. 5
S# 3J5P1U-12, 24 Speeds from 14 to 1,400 rpm, Table size 20" x 94", Table size inside coolant trough in table is 13" x 85 1/2", Table travel 54", Knee travel up/down 20", Knee travel in/out 15", No. 50 Spindle, 50hp 220/440v 126/63 amp 3ph (wired 440v), Knee is off mill for moving
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4) (PHOTO5)
$10,000 |
 Cleveland No. 2 mill
13" x
50" Table, No. 40 Spindle, Speeds 16 from 13 to 350 rpm, Feeds 16 from
.613 to 18.37, 5hp 220/440/3ph
(PHOTO)
$1,000 |
 Hardinge Horiz. Mill w/Vert. Bridgeport Head
Mill
S#25010, Spindle speeds from 110 to 1,850, 25" x 6.5" Table, Power feed on
table, Controls: Forward/Stop/Reverse - Hi/Stop/Low, Bridgeport head S#
H763, Spindle speeds from 465 to 4,250, Controls: Forward/Stop/Reverse,
1/2hp 220/440v 60/50 cy 3ph
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4) (PHOTO5) (PHOTO6) (PHOTO7) (PHOTO8)
$2,750 Sale Price $2,200 |
 Heald 122 Borematic
S# 2764,
4 Heads/3 Excello, 1hp 3,600rpm 220/440/3ph, 1 Excello
2hp 7,200 rpm 220/440v, Heads are all style b-2113, S# 102773, They are
dove tail style mount and can adjust in/out aprox 4", Heads are
mounted 8.5" apart and can be adjusted out further, Heads have a 3.75"
flange mount with adapter plate on them to 7/8" hole, Hydraulic
controls are fast feed/slow feed/ dwell/run/auto, 24" Between spindles, 15"
x 15" x 6.5"H Riser block on
table, Table size is 15" x 7", Aprox 5" travel on table, 3/4hp 440v
Hydraulic pump, With
control panel
(PHOTO)
$3,000 |
 Kent Owens 2-20 Production Mill
3hp, 20" x 12" x 9"
(PHOTO)
sale price $3,000
SOLD |
 Kent Owens 1-14 Production Mill
S# 1-14-1146, Table size 5.5"x 28", Has pickoff gears for spindle
speeds 380 or 795 rpm, spindle speed range is 150 to 2,000 rpm with pick off
gears not included, Coolant pump, No. 30 Spindle, 1hp 220/440/3ph, Spindle
brake
(PHOTO)
$3,500 |
 Kearney & Trecker No. 2
Model E, S# 11-6030, Universal table, Universal vert head, 12" x 52"
Table/powered, 8 Speeds from 24 to 600 rpm, Coolant, 3hp 220/440/3ph
(PHOTO1) (PHOTO2)
$3,250 |
 Kearney &
Trecker 205 -SA Universal
Fully powered knee 3 axis, 12" x 50"
Table with 29" travel, S# 52-1005-01, New in 1969, 25 to 1,500 rpm, 16 speeds, 5hp 220/440/3ph
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
sale price $3,000 |
 Kearney &
Trecker 2 HL Universal
w/Universal vert head No. 50
taper, No. 40 on Horiz,
9" x 46" Table, Fully powered knee 3 axis, 16 Spindle speeds from 35 to
1,400 rpm, With supports and some tooling, S# 23-3286, 3hp 220/440/3ph
(PHOTO)
$5,500 |
 Kearney &
Trecker Duplex 1224
12" x 24" x 12"
(PHOTO)
$2,500 |
 Kearney &
Trecker TF425
S# 2-8358, Table size 18" x 88",
Spindle speeds 24 from 13 to 1,300 rpm, Auto cycle knee powered all 3
axis, 42" x 16" x 21"
Travels, 25hp 220/440/3ph, Heavy duty twin screw model, With supports
(PHOTO)
sale price $6,500 |
 Kearney & Trecker No. 3 Universal
Model K,
S# 13-3682, Table size 15" x 64" with 36" travel, Speeds 24
from 15 to 1500 rpm, No. 50 Spindle, 10hp 220/440/3ph
(PHOTO1) (PHOTO2)
$3,250 |
 Nichols Hand Miller
S# 5-C-671, 6.75" x 21" Table, No. 30
Spindle taper, Diamond collet holder, Manual operated X Y Z,
has rapid traverse on X, 2 Speed step pulley drive, Built in
coolant system, 1.5hp 220/440v 3ph, Overall dim. 57"H x 36"W x
36"D, Est. Wt. 2,000 lbs
(PHOTO1)
(PHOTO2)
$2,500 |
 Nichols Production Mill
Bellows feed on table,
Variable speed on spindle,
No. 40 Spindle taper, S# 7051, Table size 8.5" x 30", Forward/rev switch, 3hp,
208-230/460/3ph
(PHOTO1) (PHOTO2)
$1,800 |
 Pratt Whitney Thread Mill
Size 4.5" x 36", Model C M -1804, S# 242
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
$3,000 |
 Sunstrand Duplex No 33 Rigidmil
Type 33,
S# 25-35, 22" x 6' Table, 30" Vert
head travel, Geared for 218 or 394 rpm on spindles via pick off gears, Speed
range is 143 to 600 with pick off gears not included, No. 50 Spindles on heads
10hp x 2 on spindles, 3hp 220/440 Hydraulic motor, Hard tool steel bed ways
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4)
$2,250 |
 Sunstrand 33-1448 Simplex
Auto Production Mill
14" x 48"
Table, Rise and fall
(PHOTO1) (PHOTO2)
sale
price $5,500 |
|
