 |
Programmable electric tubing bender |
|
Maximum capacity is 1.5" Schedule 40 pipe, 2" tube
(depending on wall thickness). |
|
Download brochure (Requires Adobe Acrobat Reader) |
|
To
program a bend on the Model 200 tubing bender, simply turn the degree
hand wheel to the desired bend angle (include spring back). When
performing a bend, the die head automatically stops at the degree
indicated on the numerical counter. Allows for accurate repeatability
when performing one or multiple bends. No complicated electronics to
program. |
|
The
Model 200 tubing bender is equipped with a lead screw indicator that
ensures repeatable counter die positioning for multiple bends.
|
|
Remote operator interface is standard on this pipe bender. |
|
Like on all RMD tubing benders, the bend can be advanced after
stopping machine, saves on set up cost (material savings). |
|
Maximum CLR is 9" |
|
Maximum bend is 180 degrees (machine limit is 202 degrees).
|
|
Required power is 110V, Single Phase, 20 amp, 60 cycle |
|
Weight is approximately 510 lbs |
|
Optional rotary positioning table allows for accurate bends in varying
planes. |
|
RMD
tubing benders are made in America! |
