Model RDB-350-S Programmable Tubing Benders

RMD pipe benders offer more value for the investment.

Model 350 Rotary Draw Tube & Pipe Bender

Example Picture

 

FEATURES & BENEFITS:
 
bullet Operator Control Station allows user to store up to 20 programs, with up to 10 bends per program.
bullet Extra heavy duty design normally seen on larger models, means more value for the investment.
bulletThe Model 350-S pipe benders utilizes a portable cart with wheels for easy mobilization around the production floor.
bulletTo program a bend punch in the bend (bend 1, 2, 3, etc.), then desired angle, add spring back for the material. When complete run program with one or multiple bends. Operator interface can store up to 20 programs for quick set up.
bullet This pipe benders capacity is up to 2.5 inch Schedule 40 Pipe (up to 3.0 inch tube .187 wall thickness).
bullet Operator Control Station allows operator to control the bend (speed, forward, reverse, etc.).
bullet Quick Release Counter Die System allows maximum efficiencies for high production runs.
bulletAll die sets are color coded for easy identification (green for pipe, blue for tube, and gray for square).
bullet Foot pedal indexing allows for hands free operation

SPECIFICATIONS:

bullet Power: Model RDG-350-S pipe benders are 240 V, Three Phase, 60 hertz.
bullet Bend Material: Round or square tubing, pipe, flat stock, angle iron, or solid rod.
bullet Fast Change Over: Dies and counter dies can be changed out in a matter of seconds, no tools required.
bullet Maximum bend is 180 degrees (plus spring back).
bullet Maximum speed is 6 seconds at 180 degrees.
bullet Maximum Center Line Radius is 24 inch.
bullet Speed: Five preset speeds to choose from (depending on material).
bullet Custom dies available
bullet This pipe benders weight is Approximately 1200 lbs.

OPTIONS:

bullet Rotary positioning table available in various table lengths for repeatable bends in a single piece of material. Allows this bending machine to have accurate bends in varying planes, as well as consistent measurements between bends.

 

RMD Model 350 Tubing Bender

(above) Model 350-S with a 22 inch CLR pipe die
   Download Video
View/Download 2005 Catalog Page
Programmable Tubing Benders - Model 350-S
bulletProgrammable Electric Tube Bending Machine
bullet This tubing bender has a maximum capacity of 2.5 inch Schedule 40 pipe, 3 inch tube (.187 wall thickness), 3 inch square tubing (.093 wall thickness) 
bullet Download brochure (Adobe Acrobat Reader Required)
bullet The OCS (Operator Control Station) allows for quick, accurate repeatability of multiple or single bends.  Unit can store up to 140 programs with 10 bends per program.  The OCS unit is extremely easy to program.
bullet Extra heavy duty design normally seen on larger models of bending machines means more value for the investment.
bullet Quick release counter die system allows for maximum efficiencies for high production runs.
bullet Maximum bend is 180 degrees (plus spring back up to 206 degrees).
bullet The model 350 tubing bender has a maximum bend speed of 6 seconds at 180 degrees.
bullet This tubing bender has a larger CLR than almost all other bending equipment on the market. The maximum CLR is 24 inch.
bullet Power is 240 V, 3 phase, 60 Hertz, 30 amp
bullet Weight is approximately 1200 lbs (solid steel construction)
bullet Similar to other RMD  programmable tubing benders, the model 350 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
bullet Bend Material:  Round or square tubing, pipe, flat stock, angle iron, or solid rod.
bullet RMD tube benders are made in America!

back to index

E-mail us at: Sales@interplantsales.COM