Model IDX-10 Positioning Table

MODEL IDX-10 ROTARY POSITIONING TABLE EXTENSION
... delivers unmatched versatility, mobility, and easy operation!

RMD rotary positioning table

RMD tube positioning table

 
FEATURES and BENEFITS:

Like all RMD machines, our rotary positioning table is heavily constructed and designed with the operator in mine, meaning more value for the investment.

10' Tube Positioning table extension can be fitted to the Model 200-S, 300-S & P, 350, and 400-S.  A 15' foot table is optional for longer pieces of stock.  The rotary positioning table can easily be fitted to the bender and taken off when not required for less complex bends.  The benders, as well as the tube positioning table are on wheels so they can be rolled to another area of the shop if needed.  When using a rotary positioning table it is important to level the bender and positioning table.  The tube positioning table does have a leveling adjustment carriage for this function.

The IDX-10 positioning table allows accurate positioning of each bend in its corresponding plane (0-360 degrees) via adjustments made to calibrated rotary chuck assembly. The rotary chuck assembly opens up enough for tube or pipe with an OD up to 3" (allowing operators to utilize tubing longer than table length). A linear scale is available with mechanical stops for the exact distance between bends for accurate repeatability.

Tube benders equipped with our tubing bender positioning table are easier to use producing more repeatable bends. RMD tubing benders are American Made.

 Tubing Bender Positioning Table - Model IDX-10
bulletRMD electric programmable tubing benders can be equipped with the optional tubing bender positioning table.  A tubing bender fitted with a rotary positioning table allows for accurate bends in varying planes, as well as consistent measurements between bends
bulletRMD tube benders that can be fitted with the table are the models 200-S, 300-S, 300-P, 300-S-w/OCS, 350-S-w/OCS, and the Model 400-S.  The positioning table can be attached or taken off of the tubing bender with ease.
bulletThe IDX-10 comes standard with a 10 foot table.  We do offer an optional IDX-15 that features a 15 foot table.
bulletThe positioning carriage rolls on a precision V block rail and rides the rail using V-block bearings.
bulletThe positioning carriage has a heavy duty lubricated gear box that is used to turn the position of the completed bend to the desired varying plane.  To change the plane of bend, the operator simply turns a hand wheel and stops at the plane of bend angle (large 360 degree angle dial).
bulletThe table comes with an 8" three jaw chuck with 2-1/2" thru hole that allows for longer pieces of tubing than the table length.  Chuck can handle up to 4-1/2" OD.  The minimum OD is 1/4". 
bulletThe table has a linear indicator strip so the operator can set up accurate distances between bends.   Mechanical stops can be positioned for the start of each bend.  Using the mechanical stops is very beneficial for repeatability on bigger production runs.
bulletRMD tubing benders equipped with the tube benders positioning table is great for hand railing, auto chassis, furniture, marine products, playground equipment, and hundreds of additional applications.
bullet Like a RMD tubing bender, the positioning table is made in America!

back to index

E-mail us at: Sales@interplantsales.COM