|
| Tanks - Pumps - Dispensers |
 1,000 Gallon Plastic Liquid Storage Tanks
Enclosed by heavy galvanized steel frame, Screw off cap on top, Valve on bottom, Level chart on tank reads 100 to 1,000, Mounted on 5" pallet, Overall Dim. 45.5"L x 40"W x 40.5"H
(PHOTO1) (PHOTO2)
P.O.R. |
25hp Hydraulic Pump
25hp 230/460v 3ph 60hz 56.4/28.2 amps
1,775 rpm, Heat exchanger: model A-614-1.5-4-F-BR-H, S# 101965,
Shell 300 psi - tubes 150 psi, Temp 300°F, 4
Solenoid operated directional valves model SWH-G02-C2-A120-10,
Mfg. No. 0105
P.O.R. |
 3000 Gallon Water/Liquid Tanks
Portable Collapsible, Looks like New never been
used, Made of heavy reinforced rubber that is sun resistant, Tank has
a quick disconnect 4" fill connection, The drain is 2" connection, Tanks
where made in Dec 97 and where never used, Tanks have
heavy handles built into
them for moving, Also have lifting straps with them, Tanks come with
ground protection tarps, Tank measures 14' x 13' 6" unfilled laying out on
ground / tank may expand somewhat when filled, Tanks say they are for drinking
water but I wont warranty their use for this, Tanks where made new
by GTA containers inc 4201 Linden Ave South Bend IN phone 574-288-3459,
Tanks are missing the fill and drain hoses with the quick disconnect couplings
to fill and drain tanks, You should be able to purchase them from the
manufacturer, We have 4 tanks available, all the same descriptions, these
tanks where made for the military under contract SPO450-96-D-8005-001, Each
tank is crated separate for Shipment and measure 64"W x 84"L x 30"T and weight
each is aprox 610 lbs
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4) (PHOTO5) (PHOTO6) (PHOTO7) (PHOTO8)
$1,500 each (new cost was $7,000 each) |
|
75/40Hp Dual Pump Hydraulic Unit Sharing Same
Reservoir
230/460v 3ph, Delarvan pumps (now owned by
Hartmann) rated @ 52 gal per min 5,000 psi max, Model PV724R
3526-4, With motor starters, Heat exchangers, Approx 250 gal reservoir
$3,500 |
 Bell & Gossett ITT Fluid Technology Vari. Speed
Pumping System
Model 55DO2V005, Factory # B0769C, S# G40, Powersav 0-150
PSI, 2 x 5hp Motors 460/3ph/16.2amp, Flow 250 GPM, Reserve tank, Never been used.
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4) (PHOTO5) (PHOTO6)
$4,900 |
 Cincinnati Hildebrand Mixer
S# 814-1, 4
Stainless steel mixing tanks 20"D x 28" Round, 2 Speed 10/5hp 440v only
3ph
(PHOTO1)
(PHOTO2)
$3,500 |
 Cincinnati Washer
3 Stage wash, 1 Stage dryer, Gas fired, 24"x 20' Drum
(PHOTO1) (PHOTO2)
make offer |
 CoolFlow Chiller
Model HX-150, S# 293204511, Part
# 388205010201, Made by Neslab
Instruments, Takes R-22 refrigerant, 208/230 1ph 36amps
(PHOTO1) (PHOTO2)
$1,750 |
 CoolFlow Chiller
Model HX-150, S# A96151034, BOM# 388204010211, Made by Neslab
Instruments, Takes R-22 refrigerant, 208-230v 1ph 60hz 22.3amp, Pump Type CP-25, Digital temp control
(PHOTO1) (PHOTO2) (PHOTO3)
(PHOTO4) (PHOTO5) (PHOTO6)
(PHOTO7) (PHOTO8) (PHOTO9)
(PHOTO10) (PHOTO11)
$1,800 |
 Coolwell Chiller
Model SE-080ACZ, S#
SE-007678, Approx 1 ton cap, Takes refrig R-22 /16 oz.
(PHOTO)
$1,500 |
 Dynamelt LTI Hot Glue Machine
for 5 Gal Buckets
Model DM-5, S# D5-405
240v
9,580 watt 1ph w/2 Hoses one almost brand new, Made by a
div of graco, On wheels
(PHOTO1) (PHOTO2)
$2,900 |
 Enerpac
Hushh-Pup 10,000 PSI Hydraulic Pump and 95 Ton Cylinder
Model PER1541, S# OB7038, 1/3hp 115/230v
1ph 8.0/4.0amp 60hz, Valve: Manual 4 way, 95 Ton Enerpac hydraulic cylinder, Model RC-10010, Maximum capacity 103.1 ton, 10.25" Stroke, Cylinder effective area 20.63"², 10,000 PSI, Overall height 17.69", Wt. 160 lbs.
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4)
(PHOTO5) (PHOTO6) (PHOTO7)
(PHOTO8) (PHOTO9) (PHOTO10)
(PHOTO11)
P.O.R. |
 Enerpac 10,000
PSI Hydraulic Pump
1hp 115/230v 14.0/7.0amp 1,725 rpm 60hz duty cont. 1ph
(PHOTO1) (PHOTO2) (PHOTO3)
$1,000 |
 ESMA
E889 Automated Ultrasonic Washer/Rinser/Dryer
Model E889, S# 889-11, 18 Gallon tank
capacity 24"W x 14"FB x 12"D, All stainless steel, Allen
Bradley TCAT control, Switch Controls: Power on/off - Cycle
run/stop - Start button - Tank fill/clean/fill+clean, 1,800
watt ultrasonic power, 110v Ultrasonic system, 230v Hot air
dryer, Overall Dim. 28"W x 22"FB x 39"H
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
$5,900 |
 Graco/LTI Dynamelt 55 hot Glue machine
Model B, For 55 gallon drums, 2 Units for Sale S# 534 And S# 535, Assembly L18101/l18124, 10' hose, Spare parts spare hose and manuals with machines, Would like to sell as lot but will separate, 480v 3ph 30amps
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4) (PHOTO5)
$9,900 for both $6,000 for one with extras |
 Graco Pumps
Air powered, Model 206596, Pump # 208356, Ratio 10-1, Pressure 125 psi
(PHOTO1) (PHOTO2)
(2 in stock) $250 each |
 HoleShooter Systems Inc. High Pressure Coolant Pump
Model # 1505-SAT3, Max pressure 1,000 PSI, Coolant volume 5 GPM, Dimensions 27 1/4"D x 32"W x 41"H, Space required 3' x 4' x 4', Coolant tank capacity 25 Gallons, Motor 5hp 230v 3ph 3.75kva, Trip disconnect 40amp, Filter element 50/25 Micron. (Pump): Series P220A, Volume up to 4.7GPM, Discharge up to 2,000 PSI, Inlet pressure up to 90 PSI, RPM up to 1,750,
Plunger diameter 18mm, Stroke 14.1mm, Temperature of pumped fluids up to 160˚F, Inlet ports (2) 3/8" BSP, Discharge ports (2) 3/8" BSP, Shaft rotation: top of pulley towards fluid end, Crankshaft diameter 24mm, Key width 8mm, Shaft mounting: right side facing manifold, Volumetric efficiency @ 1,750 RPM 0.95, Mechanical efficiency @ 1,750 RPM 0.86.
(PHOTO1) (PHOTO2) (PHOTO3)
(PHOTO4) (PHOTO5) (PHOTO6)
(PHOTO7) (PHOTO8) (PHOTO9)
(PHOTO10)
$1,500 SOLD |
 Hydro Pak Hydraulic Pump
S# 1608, 5hp 230/460v 3ph 60hz 16.8/8.4 amps 1,170 rpm
(PHOTO1) (PHOTO2) (PHOTO3)
(PHOTO4) (PHOTO5) (PHOTO6)
P.O.R. |
 Metal Wash Parts Cleaner
Model RO -23, Screw type, Rinse dry type, Variable speed, 3hp, 10" Opening, Steam heated
(PHOTO1) (PHOTO2)
$1,500 |
 Mixer Large Batch Style
Stainless steel,
Twin screw, Approx 40 cu ft.
(PHOTO1) (PHOTO2) (PHOTO3)
make offer |
 Northern Pump Hydraulic Unit on Cart
15hp
870 rpm 220/440v 3ph, 15 gpm 2,000 psi, Size 5220, S# 258, About 40 gal cap reservoir,
With motor starter
(PHOTO)
$1,250 |
 Paul-Munroe Hydraulic Pump & Tank
S# 1H1341C, 10 hp, 20 Gal. tank, 3'L x 20"W x 32.5"H, Est. Wt. 600 lbs
(PHOTO)
$500 |
 P & K Liquid Solids Blender
S#
177267, Max density 150 cu ft, Working capacity 3 cu ft, Manual quick clamp removable covers, 6" Diameter drain valve at bottom of blender, Overall dim 39"FB x 5'L x 6.5'H, Est. Wt. 1,500 lbs
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
P.O.R. |
 PreMelters Glue Heater
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4)
P.O.R. |
 Ramco Parts Cleaners
Model CM60SS, 1000 lbs
Capacity, 2 Available with the following S#'s S# J8406-87-001
& S# J8406-87-003, All stainless steel construction, Air powered lift table 32" x 56" with 36" lift, Opening in tank 5'L x 3'W
x 3'D to top of table in lowered position, Approx
450 gal cap tanks, Air dryer blower motor spec's 2hp 208-230/460v 3ph
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4)
$4,950 |
 Ramco Parts
Washer
Model MKD24EWR, S# JB856-99-001, Mfg. year
1999 460v 3ph
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
$9,500 |
 Ramco Parts
Washer
Model MKD24ERD, S# JB856-99-002, Mfg. year
1999 460v 3ph
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
$7,500 SOLD |
 Racine Hydraulic Pump & Tank
Model # 07002,
S#
30295, 20 hp, 70 gal. Tank, 4' 1.5"L x 28"W x 40"H, Est. Wt. 1,200
lbs
(PHOTO)
$1,250 |
 Remcor Fluid Chiller
Model CH750-A,
S#
3886, Refrigerant type R12 - 3.5 lbs, Digital temp control, 115v 1ph 60hz 16.46amps
(PHOTO1) (PHOTO2) (PHOTO3)
(PHOTO4) (PHOTO5) (PHOTO6)
(PHOTO7)
$1,000 |
 Uni Flow Hot Glue Machine
For 5
gallon buckets, Made by Industrial Machine MFG, Model I218-1030H, S#
M9612-1, New Dec. 96, PLC Programmable control, Sego O
Seal plunger,
1/2" x 12' Immco 230v 1ph 2.0amp hose, Wired 230v 3ph, 2 hp 230/460 3ph
Hydraulic pump, With manuals, On wheels
(PHOTO1) (PHOTO2)
$4,900 |
 Uni Flow II Hot Glue Machine
Model I917-330,
S# M9111-1, 55 Gal & 5 gal setup, Fiber unloader, Multi piece drum sealer,
Single seal, Air lift, Cart style, 1hp 180v 5amps 1,750 rpm on pump, Digital
temp, CNC controller for unloader, Zenith vari speed pump
(PHOTO1) (PHOTO2) (PHOTO3) (PHOTO4)
$7,900 |
|
