MODEL 105-24
Features
 | Unit has 4 workstations including notcher at rear of machine. Different processes can be done without retooling stations |
| Manual punch aligner allows punches and dies to be aligned without lowering the machine under power |
| Bar shear has 4-sided blades and a fixed or adjustable hold down |
| Electronic stroke control |
| Grease bank allows lubricating machine without removing covers |
| Two-stage hydraulic pump |
| Portable electric foot control |
| Built for fork-lift handling |
Accessories
| Punch nut wrench for L series or 150 and 500 series punch nut. |
| Punch rack holds 30 sets of L series punches. |
| Punch table with adjustable jig for high production with accuracy |
| Deluxe back gauge for production shearing up to 6-foot lengths |
| Bar shear stop for production shearing up to 24" lengths |
| Bin for collecting steel dropping from bar shear |
| Oversize die stand for punching over 2-1/4" round (specify type and thickness of material to be punched) |
| Offset die stand for punching close to the web on angle iron (Specify size of angle and largest hole diameter to be punched, Also specify how close to the web the hole will be located (measured from the inside) |
Optional Tooling
Punch Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
| Brake: 6,9,18 or 24" |
Power Station
| Brake: 6,9 or 14" |
| Angle shear |
| Channel shear |
| Rod shear (round or square) |
| Z & T shear |
Notching Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
|
|
|
| SPECIFICATIONS | |
| Throat Depth | 14" - 24" |
| Punch | 2" hole in 1/2" 1 3/4" hole in 3/4" 2 1/4" hole in 7/16" |
| Bar Shear | 1" x 8" 3/4" x 12" 1/2" x 20" 1'4" x 24" |
| Angle Shear 90° Slug Type Sever Cut |
6" x 6" x 1/2" 6"x 6" x 1/2" |
| Miter Angle 45° Bar Shear Slug Type |
4" x 4" x 1/2" 4" x 4" x 3/8" |
| Channel Shear | 2" and 3" combined 4", 5" or 6" standard |
| Rod Shear Round (max.) Square (max.) |
1 1/4" 1 1/4" |
| Coper Notcher 90° | For 4" x 4" x 5/16"
angle For 4" x 4" x 1/2" angle |
| Square Notcher | 3" x 3" x 5/16" 3" x 3" x 3/8" |
| Pipe Notcher Sched 40 or 80 |
1/2" through 2" (Larger sizes available on request) |
| Brake | 6", 9", 14", 18" or 24" x 1/4" capacity |
| Strokes per minute (light material) (at max capacity) |
40 8 |
| Hydraulics | 3,000 psi 2 stage pump |
| Oil Capacity | 20 gallons |
| Motor Standard Optional |
7 1/2 HP, 3 phase 7 1/2 HP, 1 phase |
|
Dimensions Width Length Height |
35" 77-1/2" 88-1/2" |
| Weight (net) | 6,590 lbs |
|
UNI-HYDRO 110530 $16,270.00 "PRO 105 TON (4 STATION) 7-1/2H.P., 3PHASE |
|
UNI-HYDRO 110510 $16,670.00 "SAME AS ABOVE 7-1/2H.P., 1 PHASE |