MODEL 150-24
Features
 | Unit has 4 workstations including notcher at rear of machine. Different processes can be done without retooling stations |
| Manual punch aligner allows punches and dies to be aligned without lowering the machine under power |
| Bar shear has 4-sided blades and a fixed or adjustable hold down |
| Adjustable stroke control |
| Grease bank allows lubricating machine without removing covers |
| Two-stage hydraulic pump |
| Portable electric foot control |
| Built for fork-lift handling |
Accessories
| Punch nut wrench for L series or 150 and 500 series punch nut. |
| Punch rack holds 20 sets of L series punches. |
| Punch table with adjustable jig for high production with accuracy |
| Bar shear stop for production shearing up to 24" lengths |
| Bin for collecting steel dropping from bar shear |
Optional Tooling
Punch Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
| Brake: 6 to 24" |
Power Cavity
| Brake: 6 to 14" |
| Angle shear |
| Channel shear |
| Rod shear (round or square) |
| Z & T shear |
Notching
(Max. Cap. 45 ton)
| Square notcher |
| Coper notcher |
| Pipe notcher |
|
|
|
| SPECIFICATIONS | |
| Throat Depth | 12 - 24" |
| Punch | 1-7/8" hole in 1" (With special tooling) 4" hole in 7/16" |
| Bar Shear | 1" x 14" 3/4" x 18" 5/8" x 22" 1/2" x 24" |
| Angle Shear 90° Slug Type Sever Cut |
6" x 6" x 1/2" 6"x 6" x 1/2" |
| Miter Angle 45° Bar Shear Slug Type |
4" x 4" x 1/2" 4" x 4" x 3/8" |
| Channel Shear | 2, 3, 4, 5, 6, 7, 8" |
| Rod Shear Round (max.) Square (max.) |
1-1/2" 1-1/2" |
| Coper Notcher 90° | For 4" x 4" x 5/16"
angle For 4" x 4" x 1/2" angle |
| Square Notcher | 3" x 3" x 5/16" 3" x 3" x 3/8" |
| Pipe Notcher Sched 40 or 80 |
1/2" through 2"(Larger sizes available on request) |
| Brake | 6", 9", 14", 18" or 24" x 1/4" capacity |
| Strokes per minute (light material) (at max capacity) |
40 8 |
| Hydraulics | 3,000 psi 2 stage pump |
| Oil Capacity | 20 gallons |
| Motor Standard Optional |
7-1/2 HP, 3 phase 7-1/2 HP, 1 phase |
| Dimensions Width Length Height |
46" 77-1/2" 98" |
| Weight (net) | 8,000 lbs. |
|
UNI-HYDRO 115030 $35,750.00 "150 TON IRONWORKER W/24"" BAR SHEAR BLADE, 7-1/2 H.P., 3 PHASE |
|
UNI-HYDRO 115010 $36,190.00 "SAME AS ABOVE: 1 PHASE, 7-1/2 H.P. |
|
UNI-HYDRO 115040 $48,950.00 "SAME AS ABOVE: 24"" PUNCH THROAT DEPTH, 3 PHASE, 7-1/2 H.P. |
|
UNI-HYDRO 115050 $49,390.00 "SAME AS ABOVE: 24"" PUNCH THROAT DEPTH, 1 PHASE, 7-1/2 H.P. |