|
MODEL 42-14
Features
 | Manual punch aligner (Models 42-14 and N42-14)
|
| 6" open throat punch has 42-ton capacity
|
| 14" bar shear with 4-sided blades
|
| Bar shear holddown can be fixed or adjustable
|
| Variable stroke control
|
| Built for forklift handling
|
| Magnetic starter for safety and reliability
|
| Built-in square notcher (Model N42-14)
|
Accessories
| Punch nut wrench for L series punch nut.
|
| Punch rack holds 20 sets of L series punches.
|
| Punch table with adjustable jig for high production
with accuracy |
| Bar shear stop for production shearing up to 24"
lengths |
| Bar shear table extends the table from 3" to 12"
|
| Grease bank allows lubricating without removing machine
covers |
| Bin for collecting steel dropping from bar shear
|
| Oversize die stand for punching over 1-3/8" round
(specify type and thickness of material to be punched) |
| Oversize stripper for punching over 1-3/8" round
|
| Offset die stand for punching close to the web on angle
iron (Specify size of angle and largest hole diameter to be punched, Also
specify how close to the web the hole will be located (measured from the
inside) |
Optional Tooling
Punch Station
| Square notcher
|
| Coper notcher |
| Pipe notcher |
| Brake: 6"
|
Power Cavity
| Square notcher
|
| Coper notcher |
| Brake: 6 or 9"
|
| Angle shear |
| Channel shear |
| Rod shear (Round or square)
|
| Z & T shear
|
|
Model N42-14 shown
with Slug Type
Angle Shear |
Model 42-14 SLS |
|
SPECIFICATIONS |
| Throat Depth |
6" |
| Punch |
11/16" hole in 1/2"
13/8" hole in 3/8" |
| Bar Shear |
3/8" x 14"
1/2" x 10"
5/8" x 6" |
Angle Shear 90°
Slug Type
Sever Cut |
3" x 3" x 3/8"
3" x 3" x 1/4" |
Miter Angle 45°
Bar Shear
Slug Type |
3" x 3" x 5/16"
2" x 2" x 5/16" |
| Channel Shear |
2" or 3" standard |
Rod Shear
Round (max.)
Square (max.) |
3/4
3/4 |
| Coper Notcher 90° |
For 3" x 3" x 1/4"
angle |
| Square Notcher |
1 3/4" x 2" x 1/4" |
Pipe Notcher
Sched 40 or 80 |
1/2", 3/4", 1", 1
1/4", 1 1/2" |
| Brake |
6" or 9" x 1/4" |
Strokes per minute
(light material)
(at max capacity) |
50
17 |
| Hydraulics |
1,000 psi |
| Oil Capacity |
15 quarts |
Motor
Standard
Optional |
3 HP, 3 phase
3 HP, 1 phase |
Dimensions
Width
Length
Height
Bar shear working height
Punch table top ht.
Cavity table top ht.
Notcher station working height |
28"
34"
60"
29"
38 1/4"
37 1/2"
22" (N42-14 only) |
| Weight (net) |
1,300 lbs. (N42-14)
1,240 lbs. (42-14)
1,205 lbs. (42-14SLS) |
Uni-Hydro
Accessories
UNI-HYDRO
104230
$5,475.00
"42 TON IRONWORKER W/14"" BAR SHEAR BLADE, 3 H.P., 3 PHASE
|
UNI-HYDRO
104210
$5,650.00
"SAME AS ABOVE: 1 PHASE, 3 H.P.
|
UNI-HYDRO
104231
$5,075.00
"(SLS) 42 TON IRONWORKER W/14"" BAR SHEAR BLADE, 3 H.P., 3
|
UNI-HYDRO
104211
$5,250.00
"(SLS) SAME AS ABOVE: 1 PHASE, 3 H.P.
|
UNI-HYDRO
104240
$6,670.00
"42 TON IRONWORKER FOUR STATIONS W/14"" BAR SHEAR BLADE, 3 H.P. 3 PH
|
UNI-HYDRO
104250
$6,845.00
"SAME AS ABOVE: 1 PHASE, 3 H.P.
|
|
|
