MODEL 56-14
Features
 | Open throat punch has 56-ton capacity |
| 14" bar shear with 4-sided blades |
| Bar shear hold down can be fixed or adjustable |
| Magnetic starter for safety and reliability |
| Built for forklift handling |
Accessories
| Punch nut wrench for L series punch nut. |
| Punch rack holds 20 sets of L series punches. |
| Punch table has adjustable jig for high production with accuracy |
| Bar shear stop for production shearing up to 24" lengths |
| Bar shear table extends the table from 3" to 12" |
| Grease bank allows lubricating without removing machine covers |
| Bin for collecting steel dropping from bar shear |
| Oversize die stand for punching over 1-3/8" round (specify type and thickness of material to be punched) |
| Oversize stripper for punching over 1-3/8" round |
| Offset die stand for punching close to the web on angle iron (Specify size of angle and largest hole diameter to be punched, Also specify how close to the web the hole will be located (measured from the inside) |
| Manual punch aligner (factory installed only) |
| Remote hydraulic foot control |
Optional Tooling
Punch Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
| Brake: 6" only |
Power Cavity
| Brake: 6 or 9" |
| Angle shear |
| Channel shear |
| Rod shear (Round or square) |
| Z & T shear |
| SPECIFICATIONS | |
| Throat Depth | 6" |
| Punch | 1 1/4" hole in 1/2" 13/16" hole in 3/4" |
| Bar Shear | 3/8" x 14" 1/2" x 10" 5/8" x 8" 3/4" x 6" |
| Angle Shear 90° Slug Type Sever Cut |
3" x 3" x 3/8" 4" x 4" x 3/8" |
| Miter Angle 45° Bar Shear Slug Type |
3" x 3" x 5/16" 2" x 2" x 5/16" |
| Channel Shear | 2" and 3" combined 4" standard |
| Rod Shear Round (max.) Square (max.) |
1 1/16" 1 1/16" |
| Coper Notcher 90° | For 3" x 3" x 1/4" angle |
| Square Notcher | 1 3/4" x 2" x 1/4" |
| Pipe Notcher Sched 40 or 80 |
1/2", 3/4", 1", 1 1/4", 1 1/2", 2" |
| Brake | 6" or 9" x 1/4" |
| Strokes per minute (light material) (at max capacity) |
9 |
| Hydraulics | 1,200 psi |
| Oil Capacity | 20 quarts |
| Motor Standard Optional |
5 HP, 3 phase 5 HP, 1 phase |
| Dimensions Width Length Height |
27 1/4" 33" 57" |
| Weight (net) | 1,300 lbs. (N42-14) |
|
UNI-HYDRO 105080 $8,555.00 "PRO 56 TON (4 STATION) 5 H.P. , 3PHASE |
|
UNI-HYDRO 105090 $8,730.00 "SAME AS ABOVE: , 5 H.P., 1 PHASE |
|
UNI-HYDRO 105030 $6,645.00 "56 TON IRONWORKER W/14"" BAR SHEAR BLADE, 5 H.P., 3 PHASE |
|
UNI-HYDRO 105010 $6,845.00 "SAME AS ABOVE: 1 PHASE, 5 H.P. " |