MODEL 66-24
Features
 | Open throat punch has 66-ton capacity |
| 24" bar shear with 4-sided blades can miter angle iron to 3" x 3" x 5/16" |
| Bar shear hold-down can be fixed or adjustable |
| Variable stroke control |
| Built for forklift handling |
| Magnetic starter for safety |
| Electric foot control |
Accessories
| Punch nut wrench for L series or 150, 250 and 350 series punch nut |
| Punch rack holds 30 sets of L series punches |
| Bar shear stop for production shearing up to 24" lengths |
| Grease bank allows lubricating without removing machine covers |
| Bin for collecting steel dropping from bar shear |
| Punch and die sets for 150 and 250 series. |
| 350 series for punching over 2-1/4" round (specify type and thickness of material to be punched) |
| 350 series stripper for punching over 2-1/4" round |
| Offset die stand for punching close to the web on angle iron (Specify size of angle and largest hole diameter to be punched, Also specify how close to the web the hole will be located (measured from the inside) |
Optional Tooling
Punch Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
| Brake: 6, 9, 18, 24" |
Power Cavity
| Brake: 6 or 9" |
| Angle shear |
| Channel shear |
| Rod shear (Round or square) |
| Z & T shear |
| SPECIFICATIONS | |
| Throat Depth | 9" |
| Punch | 1 5/8" hole in 1/2" 2 1/4" hole in 3/8" |
| Bar Shear | 1" x 6" 3/4" x 10" 1/2" x 16" 3/8" x 22" 1/4" x 24" |
| Angle Shear 90° Slug Type Sever Cut |
6" x 6" x 3/8" 5" x 5" x 1/2" 4" x 4" x 3/8" |
| Miter Angle 45° Bar Shear Slug Type |
4" x 4" x 1/2" 4" x 4" x 3/8" |
| Channel Shear | 2" or 3" combined 4" or 5" standard |
| Rod Shear Round (max.) Square (max.) |
1 1/4" 1 1/4" |
| Coper Notcher 90° | For 4" x 4" x 3/8" |
| Square Notcher | 3" x 3" x 3/8" |
| Pipe Notcher Sched 40 or 80 |
1/2", 3/4", 1", 1 1/4", 1 1/2", 2" |
| Brake | 6", 9", 14", 18", 24" x 1/4" |
| Strokes per minute (light material) (at max capacity) |
50 9 |
| Hydraulics | |
| Oil Capacity | |
| Motor Standard Optional |
5 HP, 3 phase 5 HP, 1 phase |
| Dimensions Width Length Height |
27 1/4" 33" 57" |
| Weight (net) | 1,330 lbs |
|
UNI-HYDRO 106630 $11,170.00 "66 TON IRONWORKER W/24"" BAR SHEAR BLADE, 7-1/2 H.P., 3 PHASE |
|
UNI-HYDRO 106610 $11,570.00 "SAME AS ABOVE: 1 PHASE, 7-1/2 H.P. |