MODEL PRO-80
Features
 | Manual punch aligner |
| 80-ton open throat punch |
| 24" bar shear with 4-sided blades |
| Magnetic starter for safety and reliability |
| Fixed or adjustable bar shear hold-down |
| Electric foot control |
| Eyelet and forklift accommodations |
| Variable stroke control |
| 4th station allow notching without retooling |
| Grease bank for lubrication fittings without removing covers |
Accessories
| Punch nut wrench for L series or 150 and 500 series punch nut |
| Bar shear stop for production shearing up to 24 inch lengths |
| Deluxe back gauge for production shearing up to 6-foot lengths |
| Punch table with adjustable jig for high production with accuracy |
| Punch rack holds 30 sets of punches and dies |
| Bin catches steel dropping from bar shear |
| Oversize die stand for punching over 2-1/4" round (specify type and thickness of material to be punched) |
| Oversize stripper for punching over 2-1/4" round |
| Offset die stand for punching close to the web on angle iron (specify size of angle, largest diameter hole to be punched, and -- measuring from the inside -- how close to the web the hole is located) |
Optional Tooling
Punch Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
| Brake: 6, 9, 18 or 24" |
Power Cavity
| Square notcher |
| Coper notcher |
| Brake: 6, 9 or 14" |
| Angle shear |
| Channel shear |
| Rod shear (round or square) |
| Z & T shear |
4th Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
|
UNI-HYDRO 108040 $13,685.00 "PRO 80 TON (4 STATION) 7-1/2 H.P. , 3 PHASE |
|
UNI-HYDRO 108050 $14,085.00 "SAME AS ABOVE 7-1/2 H.P. , 1 PHASE |