MODEL PRO 56
Features
 | Open throat punch has 56-ton capacity | ||||||
| 14" bar shear with 4-sided blades | ||||||
| Bar shear hold down can be fixed or adjustable | ||||||
| Magnetic starter for safety and reliability | ||||||
| Built for forklift handling | ||||||
| Full up and down stroke control | ||||||
| 4th station switch to nay of these notcher styles
| ||||||
| Notcher of choice comes standard with machine |
Accessories
| Punch nut wrench for L series punch nut. |
| Punch rack holds 20 sets of L series punches. |
| Punch table has adjustable jig for high production with accuracy |
| Bar shear stop for production shearing up to 24" lengths |
| Bar shear table extends the table from 3" to 12" |
| Slug type angle shear |
| Manual punch aligner |
| Grease bank allows lubricating without removing machine covers |
| Bin for collecting steel dropping from bar shear |
| Oversize die stand for punching over 1-3/8" round (specify type and thickness of material to be punched) |
| Oversize stripper for punching over 1-3/8" round |
| Offset die stand for punching close to the web on angle iron (Specify size of angle and largest hole diameter to be punched, Also specify how close to the web the hole will be located (measured from the inside) |
| Remote foot control |
Optional Tooling
Punch Station
| Square notcher |
| Coper notcher |
| Pipe notcher |
| Brake: 6" |
Power Cavity
| Brake: 6 or 9" |
| Angle shear |
| Channel shear |
| Rod shear (Round or square) |
| Z & T shear |
|
UNI-HYDRO 105080 $8,555.00 "PRO 50 TON (4 STATION) 5 H.P. , 3PHASE |
|
UNI-HYDRO 105090 $8,730.00 "SAME AS ABOVE: , 5 H.P., 1 PHASE |