|
|
Drill Presses |
 Allen
19" Dual Head
High speed head on one head 9 speeds from 500 to 4,580 rpm,
1/32" to 1/2" Albright keyless chuck, Powered down feed, Max daylight under
spindle is 11"/could be raised if you add spacer under head, 5" Spindle travel,
Sliding heads adjust 6", 1/2hp 3ph motor, Other head is 4 speed from 900 to
2,070 rpm, With Jacobs 1/2" chuck, 1hp 208-220/440/3ph, Both heads mounted
on a steel table that measures 32"W x 74"L x 31"H with 3/4" steel plate on top,
Overall height is 70"H
(PHOTO1)
(PHOTO2) (PHOTO3)
$1,750 |
 Allen 16" Floor Drill
3/8" Drill Jacobs
chuck, 4 Speed 990/1,565/2,640/4,180 rpm, S# 20537, 20" x 14" T
Slotted
table, 4" Spindle travel with power down feed
(PHOTO1) (PHOTO2)
$1,100 Sale Price $1,000 |
 Allen 30" Die Drill
S# 26632,
5" Spindle travel, 34" x 25" Heavy table, 3 Power down feeds .003/.006/.010,
Spindle speeds are 1/4 of normal with gear motor on it, 4 Speeds from 85 to
500 rpm would be 340 to 2,000 rpm with 1,200 rpm motor, Coolant, 1hp 340 rpm
220/440v 3ph
(PHOTO1) (PHOTO2)
$1,500 |
 Avey 18" No. 2 Drill
S#
MA1260, 5" Spindle travel, No. 2 Morse taper, 1 Speed 715 rpm, 16" x 14"
Table,
1.5hp 3,450 rpm 220/440v 3ph
(PHOTO)
$800 |
 Avey 2 Spindle 20" No. 2
S#
22339, No. 3 Morse taper, Power down feed, 32" x 21" Table, 6 Speeds from 225 to
1,800 rpm, 1.75/.875hp 220v 3ph, 2 Speed motor
(PHOTO)
$1,500 |
 Avey 4 Spindle 28" Swing
Size 2,
Geared head, 59" x 22" Table, Gang drill, Adjustable table, No. 2
Morse,
6 Spindle speeds from 150 to 1,800 rpm, S# MA15600, 1hp 220/440v 3ph
(PHOTO)
$3,000 |
 Avey 4 Spindle Gang Drill
Size 2,
Style MA6, S# MA7770 & S# MA8480, 4 Power down feeds .003/.006/.009/.012, 6
Speeds 225/450/675/900/ 1,350/1,800, 1.75hp/.875hp 2 Speed 220v 3ph
(PHOTO1) (PHOTO2)
(2
in stock)
$2,000
each |
 Boice Crane Gear Head Drill 23" Swing
Powered down feed/3 rates, No. 3 Morse taper, 8 Speed 82 to 1,460 rpm, 5"
Spindle travel, 20" x 25" Table, 1/2" Jacobs ball chuck, 220v 3ph 2
Speed motor
1.1/1.6hp
(PHOTO1)
(PHOTO2)
$1,750 |
 Boice Crane Gear Head Drill
Type 24100, S# 30328, Column to center of spindle 11", Spindle speeds 8-ranges 82 to1,460 rpm, 1/2" Drill chuck (mfg. Jacobs-6A), 1.5hp 220v, Table size 2' 3/4"W x 20"FB, Overall dim. 2' 3/4"W x 30"FB x 5' 8"H, Est. Wt. 1,200 lbs
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
(PHOTO9)
(PHOTO10)
$2,900 SOLD |
 Buffalo 2 Spindle 16" Drill
Model
No. 16, 28" Swing in gap, No. 2 Morse spindles, 11.5" x 56" Table adjust up/down
12" with coolant trough, 6" Spindle travel, 5 Speeds -
400/660/100/1,800/3,000 rpm
(PHOTO)
$1,100 |
 Burgmaster 2A-2297 2hp
Auto turret, Coolant
(PHOTO)
$3,950 |
Burgmaster 1A on Stand
$2,900 |
 Cincinnati 24"
Geared
head, 20" x 20" T Slotted table, 10" Spindle travel, No. 4 Morse
taper spindle, 3hp 1,150 rpm 440v
(PHOTO1)
(PHOTO2)
$900 |
Cincinnati Bickford 24"
"Super Service", 22" x 13.5", Box table, 11" Spindle travel, 12 Speeds from 60 to 1,000 rpm, 9 Down feed rates from .005 to .043 per/rev, 5hp 220/440v 3ph, coolant
$4,450 |
 Cincinnati Bickford
28"
"Super Service", No. 5 Morse taper Production 10hp
(PHOTO1) (PHOTO2)
$7,500 |
 Cincinnati Bickford 28" Swing
"Super Service", 7.5hp, 24" Square,
No. 5
Morse taper
(PHOTO)
$7,500 |
 Clausing
2 Head 20" Drill Press
2 Heads
on table, #1: Model 2276, S# 512478, #2: Model 2283, S# 506739, 220v 3ph 60hz,
Cleaned & Painted
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
(PHOTO9)
(PHOTO10)
(PHOTO11)
(PHOTO12)
(PHOTO13)
(PHOTO14)
(PHOTO15)
(PHOTO16)
$4,500 |
 Clausing
3 Head 15" Drill Press
Model 1668, S# 521034, S# 521035, S# 521036, On Clausing 20" x 60" table,
Spindle speeds from 330 to 4,000 rpm, 2 Speed motor(s) 3/4hp 208-220/440v 3ph
60/50cyc
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
$4,500 |
 Clausing
3 Head 15" Drill Press
(1)Model 1668, S# 514438, Jacobs 6A 33 taper chuck, Spindle speeds from 330 to
4,000 rpm, 2 Speed motor 208-220/440v 3ph 60hz, (2)Model 16VT, S# 505719,
Spindle speeds from 500 to 4,500 rpm, (3)Model 1668, S# 514436, Spindle speeds
from 330 to 4,000 rpm, 2 Speed motor 208-220/440v 3ph 3.0/1.5 amp 60/75hz, On
24" x 60" table
(PHOTO)
$2,100 |
 Clausing
3 Head Drill Press
Model 2286, S# 523613, S# 523614, S# 523615,
Power down feed on right head, For/Off/Rev Foot
switch control on left head, head, 80" x 24"
Work area, Morse taper No. 3 Spindles, Spindle
speeds from 250 to 2,000 rpm, 2 speed motors,
1.5hp 208-230v 3ph 850/1,725 rpm, Overall Dim.
7' 2"L x 3'FB x 6' 9"H, Est. Wt. 3,400 lbs,
Cleaned & painted
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
$6,950
SOLD |
Clausing
3 Head Drill Press
#1 Model 2287, S# 516546, Spindle speeds from
150 to 2,000 rpm, Power down feed model 2217 S#
003726, Foot pedal control, #2 Model 2287, S#
516545, Spindle speeds from 150 to 2,000 rpm,
#3 Model 2277, S# 516807, Spindle speeds from
150 to 2,000 rpm, Photos coming soon
P.O.R. |
 Cleereman
30"
Swing
Model DC 30, S# 60557, Date Nov. 1973, 30" Swing, 3" Drill capacity, Geared head, 12 Speeds from 75 to 1,500 rpm, Round
table, Power down feed, 7.5hp 460v 3ph 60cyc
(PHOTO1) (PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
(PHOTO9)
(PHOTO10)
(PHOTO11)
(PHOTO12)
(PHOTO13)
(PHOTO14)
(PHOTO15)
(PHOTO16)
(PHOTO17)
$6,500 Sale Price $4,500 |
 Cleereman 30" Swing
Sliding head
drill, Geared head, Round column, S# 30C-241, 12" Spindle travel, 27"
Round table T
slotted, No. 4 Morse taper, 16" Travel up/down on table, 1/4hp Coolant pump, 12
Speeds from 75 to 1,500 rpm, Power down feed, 7.5hp 220/440v 3ph
(PHOTO1)
(PHOTO2)
$6,500 Sale Price $4,500 |
 Craftsman
15" Bench
Top
15" Swing, 10" x 10" Table, Jacobs chuck 6A 33
taper capo 1/2", For/Rev switch on motor, 1/2hp
110v 1ph 60cyc 1,750 rpm
(PHOTO1) (PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
P.O.R. |
 Cutler
Hammer Bench Top
Bench Top
(PHOTO1)
P.O.R. |
 DoAll
Geared Head Drill 20" Swing
No. 3 Morse taper, 5" Spindle travel, Powered down feed, 8 Speeds from 80 to
2,300 rpm, Model DGP-2, S# 5-8907, 5/8" Drill chuck, 13" x 16" T Slotted table,
1.9 hp 460v 3ph
(PHOTO)
$2,500 |
 DoAll Geared Head Drill 24"
Swing
No. 3 Morse taper, Type 24200, S# 34051, 8 Speeds from 82 to 1,460 rpm, 17" x 21"
T Slotted table, 5/8" Drill chuck, 1.8 hp 460v 3ph
(PHOTO)
$2,500 |
Delta 17"
1 Head mounted on heavy cast iron table with coolant trough 36" x 24", Step pulley, 5 Speed, No. 2 Morse taper, 1hp 220/440v 3ph
$950 |
 Delta Radial Drill 60" Max Swing
1/2" Drill capacity, No. 2 Morse taper, 18" x 26" T Slotted table, 16 Speeds 175 to 8,200 rpm, 6" Spindle travel, 3/4hp 110v 1ph, Cleaned and painted
(PHOTO)
$2,500 |
 Delta Radial Drill 60" Max Swing
1/2" Drill capacity, No. 2 Morse taper, 18" x 26" T
Slotted table,
16 Speeds 175 to 8,200 rpm, 6" Spindle travel, 3/4hp 110v 1ph, Cleaned and painted
(PHOTO)
$2,950 |
 Delta
Rockwell Radial Drill
High speed, 30" Throat, 60" Swing max,
Model
15-120, S# 1798488, 1/2" Drill chuck, 42" Max column height, 16 Speeds from 175
to 8,200 rpm, 28" x 18" Heavy T slotted table, 6" Spindle travel 1/2hp
115/230v 1ph
(PHOTO1) (PHOTO2)
$3,500 |
  Delta 20"
Cat No. 70-390, S# 90F73007,
Variable speed, Power down feed
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
(PHOTO9)
(PHOTO10)
(PHOTO11)
(PHOTO12)
$2,250 |
 Delta 17"
3/4hp
220/440/3ph, Floor type, 1/2" Jacobs chuck, 12" x 11" Universal table
(PHOTO)
$700 |
 Desoutter Drill Head 3,000 rpm
Air powered feed up to 4",
Model AFDKE, 1/3hp 3,000 rpm 220/420v 3ph
(PHOTO1) (PHOTO2)
$400 have stands $150 each |
 Edlund 22"
Model 2F12,
S# 66336, 7" Spindle travel, 7" Travel on sliding head, 20"
x 24" T Slotted table, 26" Swing in gap, No. 2 Morse
taper, Power down feeds 8 from .0015 to .030, Coolant, Variable speed, 3 hp
208/220/440v
(PHOTO)
$2,250 |
 Edlund
16" High Speed 4 Head Gang Drill
Model 1F7, S# 5915, Variable speed, 2 Drill head
spindle speeds are from 600 to 5,000 rpm, Other 2 have 900
to 7,200 rpm spindles
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
(Like New)
$2,400 |
 Enco 20" Variable Speed Floor Drill Press
Model 126-2650, S#
501087, No. 3 Morse taper, Drill dia. 3/16" to 1.5" (5 to 38mm), Copper &
aluminum, 750
to 3,750 rpm, Steel 300 to 1,500 rpm, Cast Iron 350 to 1,600 rpm, 110/220v Wired
110v 1ph 1.5hp
(PHOTO1) (PHOTO2)
$1,200 |
 New Enco 22" Swing
Model 793.128889307, S#
388669, Mfg. date 2006, Drilling capacity 1", Chuck size 5/8", Spindle travel
4-13/16", Spindle distance to table 26-3/4", Spindle distance to base 48",
Table size 18-5/8" x 16-1/8", Column diameter 3-5/8", Spindle speeds 12, Spindle
RPM 180-4,200, Spindle No. 3 morse taper, Overall height 69-1/4", Base size 22-1/2" x
19-1/2", 1hp 1ph, Est. Wt. 348lbs, (2 in stock one still boxed)
(PHOTO1)
(PHOTO2) (PHOTO3)
$650 |
 Fosdick
11"
Model T46, S# 461, 3/8" Albrecht chuck, 10.75"
x 14" Table, 6 Speeds from 825 to 3,330 rpm,
1.5hp 220v 3ph
(PHOTO1) (PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
P.O.R. |
 Fosdick 24" 2 Spindle Geared Head
S#
11894, Power down feeds 4 .0015/.003/.006/.012 per/rev, Speeds 6
225/370/480/800/
1,085/1,800, No. 3 Morse taper, 6" Spindle travel, 38" x 24"
Table, 2hp
220/440v 3ph
(PHOTO)
$1,500 |
 Hammer 6" High Speed Drill
1/4"
Jacobs chuck, Model R53, S# A-85653, 1/4hp 220v 3ph, 2.5" Spindle travel
(PHOTO)
$500 |
 Hamilton Bench Top High Speed
Drill Press
2 Speed, 10" Swing, 1/4" Drill chuck, 4" Spindle travel, 6" x 10"
Knee table, S# 223653, 1/2hp 3,450 rpm 115v 1ph Motor
(PHOTO)
$500 |
 Keller Air Feed Drill
Size 9210P86,
S# K-167462, No. 4 Morse taper, 6" Stroke, Aprox 200 rpm/variable, Air
powered, Main body 4" round, Overall length 54.5"
(PHOTO)
$500 |
 Leland Gifford 24"
4 Spindle
No. 2 Morse
taper spindles, 4 Speed 540/825/1100/1695, 2/1.33/1/.67hp 440v Motors with a 220v to
440v transformer on machine to run it on 220v 3ph, S# 2MS1113, 56" x 20" T
Slotted table, Coolant
(PHOTO1) (PHOTO2)
$1,600 |
Lobo Model CM 0021 Mortson Machine
S# 9233, 1hp 115v 1ph 60cyc Date 4/1998
$850 |
New Enco 22" Drill Press
No. 3 Morse taper, 1hp 115v 1ph, T Slotted heavy duty table
$600 |
 Natco Center Drilling Machine
Model Carvin 1-SS, S# 223, 52" Approx centers with max swing of 14", 2- 1/8"-
5/8" Jacobs drill chucks, Has pair of V block holders with adjustable center
height, 2 - 1.5hp 220/440/3ph Drill head motors, Aprox 5" spindle stroke,
Coolant with electrics, Overall size is 93"L x 64"H x 44"W
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
$3,500 SOLD |
 Natco
Drill Spindles
Drive Spindles 30"L x 3/4"W, (2 each) 7" arms, Morse No. 2
taper, (2 each) 18" Arms, Morse No. 3 Taper, (2 each) 18" Arms Morse No. 1
Taper, (1) 10" Arms Morse No. 1 Taper, (1) 10" Arms Morse No. 1 Taper
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
Make Offer |
 Natco Multi Spindle
Drill
50 Spindles, Model C4B, S# 11137, 40" Round area, 1.5"
Uppers, 26 Spindles with machine, No. 2 & 3 Morse Taper, 42" x 30" T
Slotted table, Has
tapping capacity, 25 hp 220/440v 3ph
(PHOTO)
$8,000 |
 Natco Multi Spindle Drill
Model D-8, S# 133, 24
Spindle, 25" x 36" Table, Power rise and fall on
table, 3hp 220/440v 3ph
(PHOTO)
$3,500 Sale Price $2,900 |
 Powermatic Model 1150A
S# 9115V283, 450-4,800 rpm, Variable speed,
Universal table, Chuck & key, 5" Spindle
travel, Work light, 3/4hp 110v 1ph
(PHOTO1)
(PHOTO2)
$1,000 |
 Procunier No. 1 Lead Screw Cap 3/16"
Steel
With 2 spindle procunier head to tap two holes at same time,
Adjustable spindles from 1" apart to 4.5" approx, Collet type spindles,
1/2hp 115/208-230 (2 in stock) Mounted opposing each other right now to tap holes
in both sides of a part at same time
(PHOTO1)
(PHOTO2) (PHOTO3)
$500
Each or $800
for whole thing |
 Rockwell 15" Floor Drill
Series 15-017, S# 1651051, 10.5" x 10" Table, Foot pedal control, 3/4hp 115/230v 1ph
(PHOTO1) (PHOTO2) (PHOTO3)
(PHOTO4)
$550 |
 Rockwell 15" Bench Drill
10.5" x 10" Table
(PHOTO1) (PHOTO2) (PHOTO3)
(PHOTO4)
$350 |
 Solberga
20" Drill Press
Model SE 1120, S# 1733, 14" x 14" T-Slotted
table, 8 Spindle speeds from
120 to 1,548, 1.4/1.1hp 220v 3ph 60hz
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
(PHOTO9)
$2,400 SOLD |
 Sterling 2.5" Drill Grinder/Sharpener
S# DG82-17, Diamond wheel sharpener, Coolant mister, Micro gauge adjustment for
grinding, 1/2hp 115v 1ph Baldor motor 3,450 rpm
(PHOTO1)
(PHOTO2)
$1,600 Sale Price $1,500 |
 Sterling 2.5" Drill Grinder/Sharpener
Model EN 56C34F205A, S# DG6310, 0-2.5" Drill meter gage, 8-10-12 Deg drill
clearance, 0-2.5" Drill diameter, 3/4hp 115/230v 1ph 60hz 3,450 rpm
(PHOTO1)
(PHOTO2)
(PHOTO3)
$2,200 Sale Price $2,100 SOLD |
 Walker 15"
1/2", S# 52DE4A,
1/2hp 208/220/440v 3ph
(PHOTO)
$450 |
Walker Turner Multi Spindle Indexing Drill
S# 51EA2A, 3 Spindles, (6) 5C Collet holders,
Push button control, 1hp 208-220/440v 3ph
60cyc, Photos coming soon
$2,900 |
Walker Turner 20" Stand Drill
S# 11-0473, 5 Speed step pulley head, No. 3 Morse taper spindle, 7" Spindle travel, 18" x 15" T Slotted table, Forward reverse control, 1hp 208 220/440v 3ph
$1,000 |
Walker Turner 20" Stand Drill
S# 2-1143, 5 Speed step pulley head from 260rpm to 1,700 rpm, No. 3 Morse taper spindle, Power down feed, 7" Spindle travel, 18" x 14" T Slotted table, Forward reverse control, 1hp 208 220/440v 3ph
$1,200 |
 Wilton Strand 20" Gear Head Drill Press
Model 20606, S# 89970, Motor rpm 1,700/3,400, Spindle rpm 120 to 3,480, No. 3 Morse
taper, Built in light, 230v 0,9/1,1kw 3.6/4.4amp ~60
(PHOTO1) (PHOTO2)
(PHOTO3)
$1,750 |
 Wilton Strand Drill Press
Model 24514, S# 100064, Date 1994, 21"W x 15.25" Table, 5"
Spindle Travel, 8 Spindle speeds from 85 to 1,460 rpm,
1.8/2.2kw 460v 3ph 3.7/4.3amp 60cyc
(PHOTO1)
(PHOTO2)
(PHOTO3)
(PHOTO4)
(PHOTO5)
(PHOTO6)
(PHOTO7)
(PHOTO8)
(PHOTO9)
(PHOTO10)
$4,000 SOLD |
|
